The Nashoba Valley Amateur Radio Club’s December meeting is Thursday, December 18th, at 7:30 PM at the Pepperell Community Center (in Pepperell). We start gathering at 7 PM to socialize before the meeting starts.

Traditionally, NVARC’s December meeting has been “Homebrew Night” where members bring the things that they have been building all year. Over the last few years, we broadened the focus to include things like software programs you are working on, antenna projects, equipment restoration and repair, and generally anything being worked on that is not commercial off-the-shelf. In 2023 we added a “Boat Anchor Petting Zoo” category where you can show off any of your tube-based equipment.

It’s a great social night where you can experience what other people are doing, ask questions, and rub shoulders with other members and guests. If you are new or not a tinkerer don’t let that stop you from coming and enjoying yourself.

I look forward to seeing you there.

NVARC’s meetings are held at the Pepperell Community Center, 4 Hollis Street, in Pepperell, near the Pepperell rotary.

Thanks, and 73. Please feel free to contact me if you have any questions.

Bruce, K1BG
978-772-2773 or bruce.blain@charter.net

I was both surprised and delighted that my “DX Commander” prototype survived the winds Saturday night during the ARRL Sweepstakes phone contest. A 41 foot (12.5m) mast was held up by three 10″ (25.cm) tent stakes from Walmart! I checked in on it Sunday morning and snugged up the guy ropes. Man, the wind was still howling!

Overall, I think the antenna worked pretty well on all four intended bands. Although the IC-7300 has a typical limited auto-tuner (I use a KX3 in the field – it can tune a vinyl gutter) it tuned well. Better yet, it performed well. I managed over 150 contacts while operating sporadically, perhaps 16 hours in the seat. I only did search-and-pounce, only pouncing on stations I could hear quite clearly at that. I managed to work Bruce K1BG, and he mentioned that he had worked a number of new hams from his Tech classes – YAY!

I used my end-fed-half-wave (EFHW) antenna when 80 meters was open, as the prototype was cut for 10-15-20-40. I’ll likely add an inverted-L element for 80 meters in the next iteration. I didn’t really hold out hopes for a Clean Sweep of all sections, but I did manage 62. It’s clear that neither of my antennas was hitting too far to the west.

I’ll better document the prototype in the December Signal. I’ll have some data including FT8 propagation maps, as well as improvements I’ve already concocted. Well, I call them improvements…

de KK1X

In preparation for a few dozen contacts in the ARRL November Sweepstakes, I wanted a multi-band vertical. I’ve long been a fan of Callum M0MCX who manufactures the real DX Commander. Callum is kind enough to open-source all of his assembly manuals, so it’s easy enough to replicate his antennas.

SWR on 10, 20, and 40 were pretty close to designed sweet spot after a few iterations.

More details in the December Signal. Yeah, I’m a tease…

de KK1X

Sitting here in Rhododendron State Park in Fitzwilliam NH playing POTA. I am on a soft sked with a ham in AZ who is looking for New Hampshire. I’m readily available and always willing to play radio. Plus I was already in the area delivering bread to my sister.

Today I’m using my IC-7300 at 25 watts. My 10A fuses don’t support 50 watts. Ask me how I know…

If you sit in the forest long enough in September, you will get bonked with an acorn.

I’m terribly surprised at the very small difference between running 5 watts and 25 watts. I’m using a delta loop antenna today on 20 and the performance at 25 watts is barely better than 5 watts into a hamstick on my car’s roof. The littlest bit of scrutiny will disabuse anyone of the notion that this is a scientific opinion. But as the Elmers say, “Any antenna is better than no antenna”.

That said, above is the propagation pattern (20 m) over the past 15 minutes. The antenna is very close to the N-S plane.

The Nashoba Valley Amateur Radio Club (NVARC) is offering a free amateur radio licensing course beginning on Monday, September 8th. The course will prepare students for the Federal Communications Commission (FCC) Technician licensing exam that will be offered at the completion of the course. The Technician level radio operator’s license is the first of three amateur licenses offered by the FCC. Each license has increased levels of operator privileges.

The course consists of twice weekly sessions, beginning on September 8th, and meets on Mondays and Wednesdays for four weeks. The course will be held at the Grady Research building, 323 West Main St., in Ayer. Sessions will start at 7PM and last for 2 hours. An FCC license exam will be scheduled for the end of the sessions. The course is free, but there will be an FCC required $15 testing fee if you take the exam. The ARRL Ham Radio License Manual, 5th edition, will be the study guide used for the class. A limited number of study guides may be purchased from the instructor for $30 or online from the American Radio Relay League (ARRL) or Amazon.

This course is open to all; there are no age limits. Pre-registration is required; no walk-ins will be allowed. To register you must contact the instructor, Bruce Blain at (508) 341-5124 or via email at bruce.blain@charter.net.

The FCC Technician license exam covers basic regulations, operating practices and electronic theory, with a focus on VHF and UHF applications. The FCC exam consists of 35 multiple choice questions, chosen from a published list. The FCC no longer requires Morse code proficiency for an amateur radio license. This Technician licensing course is ideal for Community Emergency Response Team (CERT) members to quickly get their radio operator’s license.

NVARC has resources available to help new hams with equipment selection, set-up, and getting on the air. There are handheld radios available for as little as $30 that will economically get you on the air and talking to other hams in your area.